1. Forum
  2. Fidonet
  3. BINKD

  • non-CM nodes

    From Angel Ripoll@2:341/66 to Stas Mishchenkov on Sat Sep 24 01:57:50 2022
    Hola Stas!

    23 Sep 22 22:54, Stas Mishchenkov dijo a Angel Ripoll:

    The cost of electricity. A computer to host the system can consume
    more than 100 KWh per month.

    I have HP Proliant server fore Fido. It takes about 57.6 kWh per month (with router and switch). It costs for me about 1.6 euro.

    Perhaps I have overestimated it, but even though it is 50 KWh, the price of electricity in Spain is ¤0.20/KWh. Much more than those ¤1.6 that you pay

    Un saludo,
    Angel Ripoll
    aripoll @ zruspas.org

    --- GoldED+/LNX 1.1.5-b20220504 + HPT 1.9 + Binkd 1.1 en Debian
    * Origin: Synchronet - bbs.zruspas.org - Zruspa's BBS - (2:341/66)
  • From Carlos Navarro@2:341/234 to Michiel van der Vlist on Sun Sep 25 21:41:26 2022
    20 Sep 2022 21:49, you wrote to me:

    It takes EFFORT to configure a binkp system for non CM operation,

    I don't think it would take much effort.

    Carlos

    --- GoldED+/W32-MSVC 1.1.5-b20180707
    * Origin: cyberiada (2:341/234)
  • From Fred Riccio@1:132/174 to Michiel and Carlos on Sun Sep 25 17:02:28 2022
    Hello Michiel!

    20 Sep 22 21:49, Michiel van der Vlist wrote to Carlos Navarro:

    MvdV> It takes EFFORT to configure a binkp system for non CM operation

    If your tosser is Squish, read up on the SCHED, LEAVE, UNLEAVE, and CHANGE routing commands. RTFM doesn't take much effort <shrug>.

    --- Msged/NT 6.0.1
    * Origin: Somewhere in New Hampshire's White Mountains (1:132/174)
  • From Michiel van der Vlist@2:280/5555 to Fred Riccio on Sun Sep 25 23:16:25 2022
    Hello Fred,

    On Sunday September 25 2022 17:02, you wrote to Michiel and Carlos:

    MvdV>> It takes EFFORT to configure a binkp system for non CM
    MvdV>> operation

    If your tosser is Squish, read up on the SCHED, LEAVE, UNLEAVE, and
    CHANGE routing commands. RTFM doesn't take much effort <shrug>.

    My tosser is not Squish.


    Cheers, Michiel

    --- GoldED+/W32-MSVC 1.1.5-b20170303
    * Origin: http://www.vlist.eu (2:280/5555)
  • From Carlos Navarro@2:341/234.1 to Fred Riccio on Tue Oct 4 18:29:04 2022
    25 Sep 2022 17:02, you wrote to Michiel and Carlos:

    MvdV>> It takes EFFORT to configure a binkp system for non CM
    MvdV>> operation

    If your tosser is Squish,

    Mine isn't either :-)

    read up on the SCHED, LEAVE, UNLEAVE, and CHANGE routing commands.

    Very interesting. I didn't know about that (never used Squish). Thanks for the info!

    Carlos

    --- GoldED+/W32-MSVC 1.1.5-b20180707
    * Origin: cyberiada point (2:341/234.1)